Matrox M264, Инструкция по установке и эксплуатации

Страница: 31 / 74

19
Installing the Matrox software
$ clang -v
$ clang++ -v
4
If you have an Ubuntu version other than 12.04, install the Clang compiler
available at
http://www.llvm.org/ with the following command:
$ sudo apt-get install clang
5
Install CMake version 2.8.8 or later available at http://www.cmake.org/ .
$
For Ubuntu 12.10 or later:
$ sudo apt-get install cmake
$
For versions earlier than Ubuntu 12.10:
i
If required, uninstall any previously installed version of CMake.
$ sudo apt-get purge cmake
ii
Download the latest version of CMake and extract the sources to a local
folder. For example, if you are installing CMake version 3.0.1, type the
following:
$ tar xvf cmake-3.0.1.tar.gz
$ cd cmake-3.0.1
$ ./bootstrap
$ make
$ sudo make install
¦ Note
To access the newly installed CMake, you must first close your Terminal.
6
Download libdispatch-0.1.3.1.zip available at
https://github.com/nickhutchinson/libdispatch/releases/tag/v0.1.3.1 , then build
and install libdispatch as follows:
$ unzip libdispatch-0.1.3.1.zip
$ mkdir libdispatch-0.1.3.1-build && cd
libdispatch-0.1.3.1-build
$ ../libdispatch-0.1.3.1/configure
$ make
$ sudo make install
° To install libdispatch for CentOS 7 or openSUSE 13.1:
1
Install the following:
$
For CentOS 7:
$ sudo -E yum install epel-release
$ sudo -E yum install clang
$ sudo -E yum install cmake
$
For openSUSE 13.1:
$ sudo zypper install clang
$ sudo zypper install cmake