Matrox M264, Инструкция по установке и эксплуатации

Страница: 27 / 74

15
Additional installation information
3
Under Sleep , set Sleep after and Hibernate after to Never .
4 Under Power buttons and lid , set all the options to either Shut down or Do
nothing .
5
Click Apply to save your settings, then click OK .
6 On a Windows 10 or 8 system, click Choose what the power button does .
a
Click Change settings that are currently unavailable .
b Under Shutdown settings , clear Turn on fast startup (recommended) .
c
Click Save changes .
Windows notification area error messages
The DSX.utils setup program is designed to delete any previously-installed Matrox
device drivers found on your system before installing new drivers. When the setup
program deletes the old drivers, Windows detects the change, mistakenly assumes it is
an error, and displays an error message.
Since the old drivers are deleted intentionally as part of the installation, it is
recommended that you ignore the Windows error message, and allow the setup
program to finish installing the new Matrox drivers. If you choose to click the error
message for details, you will see a list of drivers in the process of being installed.
Your DSX card appears as either PCI Device or Multimedia Controller , and its
status is shown as “No driver found”. This status will not change even after the
installation is successful, as Windows verifies driver status sequentially, and the
drivers had already been deleted when the status was updated. Rest assured that all the
required drivers are installed, and your Matrox device will function normally if you
allow the setup program to complete the installation.
Installing the Matrox VFW software codecs on a
system without DSX hardware
The Matrox VFW software codecs let you render and play back Matrox .avi files in
your Video for Windows programs without having to install Matrox DSX.utils and
DSX hardware.
¦ Note If you’ve installed Matrox DSX.utils, you do not need to install the Matrox
VFW software codecs because all the Matrox codecs are automatically installed on
your system during the installation.
The Matrox VFW software codecs are available for download in the “Downloads”
section of the Matrox Support website at
www.matrox.com/video/support .