Matrox Digidesktop, Руководство по установке и инструкция пользователя

Страница: 38 / 66

28
Chapter 4, Configuring DigiDesktop
select a window on Monitor B, the original window will disappear
from Monitor A and a new one will appear on Monitor B.
q Source Use this list to assign a particular video source to the
currently selected video window. For example, to assign the video
source you selected in the
DigiDesktop Input A
dialog box to
Window 1 on Monitor A, select
1
under
Mon. A
, then select
Input A
from the
Source
list.
Note If your DigiDesktop is connected to one or more other cards with
a Movie-2 bus, you can select
Movie-2 Bus Main
or
Movie-2 Bus
Preview
to assign the Main or Preview output from the Movie-2 bus as
your video window source. For example, if you’re using DigiDesktop
with DigiMix, you can select
Movie-2 Bus Main
to display the Main
output from DigiMix. This feature, however, is supported only by
programs that are configured to use the Movie-2 bus Main or Preview
output.
q Proc Amp Settings Use the Hue , Chroma , Level , and Setup
controls to adjust the proc amps of the currently selected video
window. For a description of each control, see
page 26 .