Matrox Digidesktop, Руководство по установке и инструкция пользователя

Страница: 31 / 66

21
Installing DigiUtils
higher than 1280 ×1024, you’ll be able to display a maximum of one video
window per monitor.
Installing DigiUtils
The following instructions will guide you through the DigiUtils installation
process. DigiUtils Setup will prompt you to choose a directory in which to
install the DigiUtils files and a location for the program icons. Certain
messages appear throughout the process to inform you of installation
progress or errors.
Note The default directory for the DigiUtils files is C:\DigiSoft\DigiUtil.
If you want to install to a different directory and plan on accessing it with
MS-DOS, don’t use a directory name longer than eight characters.
Some of the DigiUtils Setup dialog boxes feature
Back
and
Next
buttons.
These allow you to move in either direction through the installation. If you
wish to change an installation choice in a previous dialog box, move back;
when you’ve finished, go on to the next step.
Step-by-step installation instructions
1 Close Control Panel and all Windows programs.
2
Insert the DigiSuite CD-ROM in your CD-ROM drive.
3
Choose Start | Run .
4
In the resulting dialog box, type e:\digiutils\setup (where e:
represents your CD-ROM drive), and click
OK .
5
Follow the instructions that appear on the screen. An information box
indicates when Setup is complete.
Note If your computer hangs when Setup scans your system for
installed cards, reboot your computer and run Setup again.
6 When the installation is complete, click
OK
. Setup will then restart
your computer in order for the changes to take effect.
Uninstalling the DigiDesktop software
To remove the Matrox PowerDesk software from your system, choose
Start | Programs | Matrox PowerDesk NT | Matrox PowerDesk NT
Uninstall
.
➣
To remove all the DigiUtils software from your system:
1
Do either one of the following: