Matrox Digidesktop, Руководство по установке и инструкция пользователя

Страница: 34 / 66

24
Chapter 4, Configuring DigiDesktop
Using the DigiSuite Configuration program
When you ran DigiUtils Setup to install the DigiSuite software, your
DigiDesktop was assigned default settings that are suitable for most
applications. The DigiSuite Configuration program lets you customize
these settings to meet specific video input and output requirements. For
example, you may want to change the default proc amp settings for your
video input signals and on-screen video windows.
Important Before starting the DigiSuite Configuration program, close
any program that’s using DigiDesktop, such as Matrox PowerDesk. If you
don’t do so, your system and video signals may become unstable.
To start the DigiSuite Configuration program:
1 Choose
Start | Settings | Control Panel
.
2 Double-click the
DigiSuite
icon.
The DigiSuite Configuration window opens, similar to this one:
In most cases, all your DigiSuite cards are grouped into a single card set.
Under the
Card Set 1 tab, tabs are provided for each card you can
configure in the set. To configure a card, click its tab. The General tab
displays basic information for your card set, such as the video standard
used (NTSC or PAL).