Matrox 4Sight GPm, Установка и справочник по оборудованию

Страница: 95 / 174

Advanced menu 95
Boot Configuration submenu
The Boot Configuration submenu allows you to configure boot settings.
Peripheral Configuration submenu
The Peripheral Configuration submenu allows you to configure the controllers
related to various peripheral devices that are connected to Matrox 4Sight GPm.
Item Meaning
Options
SCU resolution This item allows you to change the resolution of the setup utility.
640 x 480
800 x 600
1024 x 768*
Numlock This item allows you to turn NumLock mode on and off. The state of Numlock mode determines whether the
numeric keys or the cursor (arrow) keys on the keypad are active after bootup.
The
On option causes the numeric keys on the keypad to be active. The Off option causes the arrow keys on
the keypad to be active.
Note that this item is only an initial setting. After bootup, you can activate or deactivate the numeric keys on
the keypad by pressing the numlock key on the keyboard.
Off
On*
Device Detection Delay These items allow you to set a delay when detecting devices from which to boot. Matrox 4Sight GPm will
wait a set amount of time before attempting to detect devices.
Disabled*
250 ms
500 ms
1 s
2 s
Item Meaning
Options
Serial Port A Mode This item allow you to select the mode of Serial port A.
RS-232*
RS-485
Azalia This item allows you to enable or disable the Intel High Definition Audio (HDA) controller.
By selecting
Disabled, the audio controller will always be disabled.
By selecting Enabled, the audio controller will always be enabled.
Disabled
Enabled*