Matrox 4Sight GPm Скачать руководство пользователя

Страница: 31 / 174

Connecting peripheral devices 31

Matrox 4Sight GPm has connectors on its front and back panels to connect to the
following devices:

• USB ports are available to connect to devices such as a USB mouse, keyboard,

printer, flash drive, hard disk drive, or a -connected CD/DVD drive.

Matrox 4Sight GPm (Ivy Bridge) has four USB 3.0 ports (USB 3.0, 2.0, and 1.1
compatible) and two USB 2.0 ports (USB 2.0 and 1.1 compatible),

Matrox 4Sight GPm (Bay Trail) has one USB 3.0 ports (USB 3.0, 2.0, and 1.1
compatible) and two USB 2.0 ports (USB 2.0 and 1.1 compatible).

• Gigabit Ethernet interfaces to connect to a 10/100/1000 Mbits/sec network

(labeled PoE or LAN).

Matrox 4Sight GPm (Ivy Bridge) has six Gigabit Ethernet interfaces.

Matrox 4Sight GPm (Bay Trail) has four Gigabit Ethernet interfaces.

• Two video output display interfaces (DVI-D and DVI-I) to connect a

high-resolution analog display device (such as an analog monitor or analog flat
panel), and a high-resolution digital display device (such as digital flat panels), or
two high-resolution digital display devices.

❖

Note that the analog display device must be connected to the DVI-I output
connector using a DVI-to-VGA adapter.

• Two COM port interfaces (one of which is both RS-232 and RS-485 compatible).

• A stereo audio interface.

• An auxiliary I/O interface to connect 8 open-wire input and 8 open-wire output

devices to your Matrox 4Sight GPm unit.

Содержание 4Sight GPm















































































































































































Результаты поиска

Содержание 4Sight GPm

Отзывы:

Похожие инструкции для 4Sight GPm

Бренды по названию

Популярные бренды

Matrox 4Sight GPm, Установка и справочник по оборудованию

Результаты поиска

Содержание 4Sight GPm

Отзывы:

Похожие инструкции для 4Sight GPm

Бренды по названию

Популярные бренды