Matrix S3X-02, Руководство по обслуживанию, Страница: 43 / 64

40
FIGURE E FIGURE F
FIGURE G
9.16 DRIVE BELT REPLACEMENT - CONTINUED
FIGURE H
6) Lift up on the center axle and walk the belt off of the drive pulley (Figure E).
7) This will allow you to drop the center axle out of the frame and to remove the drive belt from around it (Figures F).
8) Disconnect the 2 pedal belt springs from the around the drive axle set (Figure G).
9) Remove the 2 screws on each side holding the drive axle set to the frame (Figure H).
10) This will allow you to remove the drive axle set and drive belt.
11) Reverse Steps 1-10 to install a new drive belt.
NOTE:
Tighten the new drive belt to 145 ft / lbs.
12) Test the stepper for function as outlined in Section 9.22.
CHAPTER 9: PART REPLACEMENT GUIDE