Matrix S3X-02, Руководство по обслуживанию, Страница: 42 / 64

39
1) Remove the shrouds as outlined in Section 9.11.
2) Loosen the 6 screws holding the generator to the frame (Figure A).
3) Loosen the nut from the tension eye bolt (Figure B).
4) Once the nut from the tension eye bolt has been loosened, the generator belt can be walked off the generator pulley (Figure C).
5) Loosen the 2 eye bolts holding the center axle to the frame (Figure D).
9.16 DRIVE BELT REPLACEMENT
FIGURE A FIGURE B
FIGURE C
FIGURE D
CHAPTER 9: PART REPLACEMENT GUIDE