Matrix 320.300.150, Перевод оригинальной инструкции

Страница: 19 / 37

19
9. TROUBLE SHOOTING
PROBLEM CAUSE ACTION
The motor does
not run
Safety swith Check if the switch still functions well.
Power failure
Check the power supply cable, the plug and
the house fuse.
The material to
be chopped is
not drawn in
The material is jammed in the
feeding funnel
Switch the shredder OFF.
Pull the material from the feed funnel.
Switch the shredder back ON and re-feed
thick branches such that the blade dose not
immediately engage the pre-cut notches
again.
Shredding material is too soft Insert wood or shred dried branches.
Press the reset button and then the On/Off
switch. If it still does not start, take the steps
indicated on page 6 ‘Overload Protection’
section.