Matrix 320.300.150, Перевод оригинальной инструкции

Страница: 14 / 37

14
or coiled cables increase the risk of an electrical
shock.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
• When you use an electrical tool out in the open,
use an extension cable that is designed foroutside
use.The use of an extension cable that is designed
for outdoor use reduces the risk of an electrical
shock.
• If it is not possible to avoid using the electrical
tool in a damp environment, use a residual
current circuit-breaker with a trigger current of 30
mA or lower.The use of a residual current circuit-
breaker reduces the risk of an electrical shock.
• Arrange the connecting cable in such a way that
it cannot be caught by branches or similarwhen
cutting.
Safety of persons
• Pay attention to what you are doing and be
sensible when working with an electrical tool. Do
not use an electrical tool if you are tired or under
the influence of drugs, alcohol or prescription
drugs.A single moment of inattention when using
an electrical tool can lead to serious injuries.
• Wear personal protective gear and always wear
goggles.Wearing personal protective clothing,
such as breathing masks, non-slip safety shoes,
protective helmet or ear defenders, according
to type and use of the electrical tool, will reduce
therisk of injuries.
• Avoid starting the tool accidentally. Ensure that
the electrical tool is switched off before you
connect it to the power supply and/or battery, or
transport it.If you have your finger on the switch
when moving the device or have it switched on
when con-necting to the power supply, this may
lead to accidents.
• Remove the adjusting tools or wrench before
switching the electrical tool on. A tool or a wrench
caught in a rotating part of the device may lead
to injuries.
• Avoid abnormal body positions. Ensure that you
are standing firmly, and keep your balance at all
times.
This will enable you to control the electrical tool
better in the event of unexpected situations.
• Wear suitable clothing. Do not wear loose-fitting
clothing or jewellery. Keep hair, clothing and
gloves well away from moving parts.Loose-fitting
clothing, jewellery or long hair may become
caught in moving parts.
• If dust suction and collection mechanisms can
be mounted, ensure that these are connected
and used correctly.Using a dust suction unit can
reduce the risks posed by dust.
1.2 Careful handling and use of electrical tools
• Do not overload the device. Use the appropriate
electrical tool for the job in hand.
Using the correct electrical tool allows you to
work better and more safety in the specified per-
formance range.
• Do not use an electrical tool with a defective
switch.An electrical tool that cannot be switched
on or off is dangerous and must be repaired.
• Pull the plug out of the socket and/or remove
the battery before making any settings to the
device, changing accessories or putting the tool
down.These safety measures will help to prevent
unintentional starting of the electrical tool.
• Keep electrical tools that are not in use well out
of the reach of children. Do not allow people
who are unfamiliar with the device or who have
not read these instructions to use the device.
Electrical tools are dangerous if they are used by
inexperienced persons.
• Take good care of your electrical tools. Check
whether the moving parts function with no dif-
ficulties and do not jam, check whether parts are
broken or damaged in such a way that the
functionality of the electrical tool is impaired.
Have damaged parts repaired before using the
device.Many accidents are caused by badly
maintained electrical tools.
• Ensure that your cutting tools are sharp and
clean.Properly cared for cutting tools with sharp
cutting edges are less likely to become jammed
and are easier to operate.
• Use the electrical tool, accessories, adjustment