Operating mode functions
page 7/20
Re-settable total
7. Operating mode functions
These functions operate the same in manual mode and auto batch mode.
7.1 Re-settable / accumulated totals
1. To see the accumulated total and the re-settable total:
• Press and hold the button to see the accumulated total.
• Continue holding the button.
• After three seconds the screen changes to the re-settable total.
2. Resettotal displays the total fluid dispensed since the
resettable total was last set back to zero.
3. Press the button while viewing Resettotal to set
it back to zero.
4. Release the button to return to the operating
screen.
NOTE:
The accumulated total cannot be reset unless the user changes from english units
to metric units or from metric to english units. (See change factory settings, change unit of
measure, on page 9).
7.2 Emergency override
In case of an emergency or to interrupt a batch, the meter is equipped with an emergency
override.
1. Press the red button on the meter to activate the emergency override. The
override closes the valve, immediately stopping fluid flow.
2. After an emergency override, batching can continue by pulling up on the trigger.
7.3 History
This option allows the user to review the previous five (5) batches dispensed with the
meter.
1. Press and hold the / HISTORY button to view the five (5) previous batches.
• The batches are displayed on screen, one at a time;
beginning with the most recent and cycling through to
the oldest.
• The batches continue to cycle as long as the history
button is held down.
2. Two (2) seconds after releasing the history button the
display automatically returns to the normal operating
screen.
NOTE:
The
HISTORY
cannot be erased unless the user changes from English to metric or
from metric to english units. (See change factory settings, page 9.)
History option
