Operating mode functions
page 6/20
3. After the batch size is selected, press the button to lock in the batch and
dispense fluid.
4. Pull the trigger to begin the flow.
• The solenoid valve, in the meter,
automatically locks the dispensing
valve in the full open position.
The meter always locks in the maximum
open position.
5. Release the trigger, allowing it to fall back.
6. The flow automatically shuts off after the batch quantity has dispensed.
7. After the batch quantity has been dispensed the meter is a free flow-dispensing
handle until the reset button is depressed.
NOTE:
In case of an emergency or to interrupt a batch, the meter is equipped with an
emergency override. (See emergency override, page 7)
8. The user has the option to top off the fluid at the end of a batch.
• To top off the fluid, pull the trigger to begin the flow and release it when the desired
amount has been pumped.
9. Press the button when finished. The display resets and the meter is now ready
to dispense the next batch.
6.3 Count up / count down modes
1. When in the auto batch programming mode, press the button and the count up
/ count down arrows flash in the display.
• Press the button to toggle between count up
/ count down.
• Press the button to select count up or count
down.
NOTE:
In the count up option the meter counts up to the
preprogrammed batch amount. In the count down option
the meter counts from the programmed batch amount
down to zero. Batch number 3 is always in the count
down mode.
2. Press the button to lock in the batch quantity when batch size is selected. The
screen flashes and the batch number icon no longer displays.
•
If the meter is in count up mode, the display shows
zeros.
•
If the meter is in the count down mode, the desired
batch size appears on the screen.
Auto
batch
size
Auto
icon
Count down arrow
Count up arrow