background image

x 3

x 3

a

20mm

b

x 3

Ø6

x 3

A

A + 20

STAGE 2

TOP VIEW

SIDE PANEL

WALL MOUNT

SILICON

TOP VIEW

THRESHOLD

SIDE PANEL
WALL MOUNT

This stage is describing the fitting of the Side panel wall mount
Before fitting the enclosure please check that your product will fit the finished aperture size.(See dimensions)

a.

 

Measure the distance from the wall side of the fixed panel wall mount to the end of the threshold (dimension A) and add 20mm (dimension 

A + 20mm) this gives you the measurement from the Wall side of the fixed panel wall mount to the outside face of the side panel wall mount. 
Mark position for side panel wall mount onto the wall. Check that this measuremennt is within the the max and min width measurements. 
Position the side panel wall mount onto the wall.  Plumb the wall mount for upright and mark the fixing holes in the centre of the slots.

b.

 

Drill 3 x fixing holes in the wall and insert wall plugs. Clean area and apply silicon sealant to the area behind the wall mount between the 

tray and tiles and 100mm up the wall, central to the width of the wall mount. Fit the wall mount using the No.8 x 32mm Pan Head Screws

THIS PAGE SHOWS THE PANEL INSTALLATION FOR A 
LH CORNER. REVERSE FOR RH.

Содержание One MOSC1000
















Отзывы: