2
1
BOTTOM
b
SILICON
a
1
2
c
STAGE 6
This stage is describing the fitting of the straight fixed panels.
a.
Apply a bead of silicon along the full length of the outer inside edge recess of the straight fixed panel floor rails where the fixed
panel is to be fitted.
b.
Before fitting the fixed panels ensure that the wall mount glass guard is pushed up fully to allow the glass to easily slot into the wall
mount.
Important
-The frame on the bottom of the fixed glass panel is slightly longer than the glass on one side. The opposite side is factory
assembled to be flush. Fit the fixed glass panel with the longer end bottom frame into the wall mount.
c.
Lightly wet the edge of the fixed panel with soapy water and gently lower the panel into the floor rail then into the wall mount.
WALL MOUNT
GLASS GUARD
SOAPY
WATER
OUTSIDE
FACE
