3mm
3mm
b
2
1
c
d
a
STAGE 4
This stage is describing the fitting of the floor rail.
a.
Remove the factory assembled guide block from the floor rail and threshold cover. Carefully set aside for re- fitting.
b.
Before fitting the floor rail remove and set aside the 2 x M5 x 12 socket screws from the floor rail bracket in the end
of the curved fixed panel.
c.
Fit the floor rail over the floor rail bracket until it meets the curved fixed panel. Ensure the joint is tight between the
floor rail and fixed panel and secure with 2 x M5 x 12 socket screws using the 3mm allen key.
INSIDE
VIEW
