Installation
Page 9
The contact angle of the scraper bar on the ground influences the snow clearing capacity
of the blade. A lesser angle results in a more aggressive clearing capacity and the spring
flap, folds with slightly more resistance. With a greater angle the spring flaps fold at light-
er resistance and the blade runs more quietly.
Note!
The blade plate must be removed to adjust the contact angle.
1.
Removing the blade plate
2.
Unscrew the 8 fastening screws
Fig. 7: Fastening screws - attachment bracket
3.
Adjust the length of the set screw.
Fig. 8: Adjust the length of contact angle - set screw
4.
Retighten the 8 fastening screws, see Fig. 7.
Note!
To avoid premature wear, do not forget to tighten the fastening screws be-
fore using the blade again.
5.
Mount the blade plate.
Set screw
Fastening screws