Installation
Page 6
3
Installation
Attention!
Before starting up the implement, read the instructions on safety and han-
dling for operation of the entire implement and connection to the tractor.
Danger!
Switch off the tractor and remove the ignition key before mounting or dis-
mounting the implements.
Note!
Enter the chassis number of the implement in section 4.3 of this operating
manual.
3.1
Attaching the snow blade on the tractor
In order to attach the snow blade to a tractor, the tractor must be equipped with a front lift.
Take up via a coupling triangle is described in more detail below:
1.
Position the snow blade in such a manner that you can drive to just in front of its
coupling triangle.
2.
Then the coupling triangle of the front lift is lowered all the way and is brought under
the triangle of the snow blade by driving the tractor forward. In this process, ensure
that the coupling triangle of the front lift is tilted slightly forward. If it is not possible to
easily drive forward under the triangle of the snow blade, then the height can be set
suitably by adjusting the coupling triangle. To do this you must remove the 6 screws
and shift the coupling triangle up or down on the attachment flange. The final step is
to retighten the threaded unions.
Fig. 1: Adjusting the coupling triangle
3.
Lifting the front power system hooks-in its coupling triangle under the coupling trian-
gle of the snow blade.
Coupling triangle
Threaded union
