Mounting the implement
Page 13
8. Repeat steps 6 to 8 on the other half of the universal joint shaft.
9. Grease the profile tubes (see Fig. 9).
Fig. 9: Grease the profile tubes
10. Slide the profile tubes together.
5.2.1
Mounting the universal joint shaft
1. Press the locking pin on the outer fork and keep it depressed.
2. Slide the outer fork onto the profile stub of the PTO shaft on the tractor.
3. Release the locking pin.
4. Slightly move the universal joint shaft back and forth until the locking pin audibly locks
in place.
5. Repeat steps 1 to 5 to attach the PTO shaft to the mower deck.
6. Hook the universal joint shaft safety chains to a stationary part on the tractor and on
the mower (see Fig. 10).
Fig. 10: Safety chain on the PTO shaft
5.2.2
Dismounting the PTO shaft
1. Detach the safety chain on both sides.
2. Press the locking pin on the outer fork and keep it depressed.
3. Pull the outer fork down from the profile stub of the PTO shaft on the tractor.
4. Release the locking pin.
5. Repeat steps 2 to 4 to dismount the universal joint shaft on the CLS.
