matev MOW-H 160 CM, Оригинальное руководство по эксплуатации, Страница: 31 / 34

Disposal
Page 31
7.2.6 Tire pressure
Check the air pressure in the tires; the tire pressure must be at least 1.5 bar.
7.3 Faults
Fault Possible cause / correction
Suction hose is clogged
 Driving too fast for the given conditions / select an
appropriate working speed
Mower does not start up

Heavy clogging in the mower / switch off the machine
immediately, remove the ignition key and clean the
mower
Poor cutting pattern
 Driving too fast for the given conditions / select an
appropriate working speed

Blade dull / sharpen blade
 Insufficient rpm / drive at full throttle

Blades have seized, e.g. due to grass remnants. Re-
move blades, clean location, lightly oil blade bearing
arrangement and reassemble. It must be possible to
easily move the blades.
 For dense grass and low cutting height – insufficient
air supply / adjust air regulating disks
7.4 Repair
If there are faults, problems, or other indications of malfunction, contact your sales con-
sultant.
Enter the article number and the chassis number here.
This information is on the type plate of the implement.
Article number: ........................................................................
Chassis number: .....................................................................
8 Disposal
The implements must be disposed of in accordance with the applicable regulations of the
municipality or the country.
Take the parts to the collection points for residual waste, special waste, or recycle them
depending on material.
matev GmbH does not provide any disposal services.