Attaching and detaching the CLS 650/850
Page 30
Fig. 47: Pivot wheel
3.
Disconnect the hydraulic hose connections.
4.
Unplug the plug-type connector from the tractor's power outlet.
5.
Uncouple the PTO shaft from the tractor.
6.
Disconnect the suction hose from the connector on the CS by loosening the appro-
priate hose clamp (see Fig. 48).
Fig. 48: Suction hose on the turbine cover
7.
Disconnect upper link connection.
8.
Relax the springs and remove them.
9.
Remove the bolt connection between arms and tractor (see Fig. 44) and push the
implement back a short distance.
10. Drive the tractor forward, away from the CLS.
6.6
Attachment with the basic hitch
Danger!
If you do not comply with the following instructions the implement can tip
over when it is being attached:
Ensure that the CLS is on a level and solid substrate.
Only mount the CLS if the collection bin is empty, closed and lowered.
Note!
You can only attach the CLS to a tractor with basic hitch if you have se-
lected the CLS with chassis.
Proceed as follows to attach the CLS-G/H 650/850 to a basic hitch:
Hose clamp
Tube linch pin
Pivot wheel
