Attaching and detaching the CLS 650/850
Page 32
To adjust the length of the upper link, turn the threaded sleeve while holding the
threaded spindle.
10. Fasten the upper link to the upper link bolt on the tractor (see Fig. 52).
Fig. 52: Upper link
11. Secure the connection with the linch pin.
12. Crank up the front support wheel.
13. Loosen the clamp lock of the front support wheel on the CLS-G/H 650/850, lift the
support wheel and arrest the clamp lock.
Fig. 53: Support wheel
14. Rotate the threaded sleeve of the upper link to adjust it to the minimum length, re-
move the support wheels of the CLS-G/H and keep them in a safe place.
15. Turn the threaded sleeve of the upper link to adjust it to an optimal length (imple-
ment in vertical position) and secure the adjustment with the lock nut.
16. Slide the suction hose onto the opening on the turbine cover and secure the connec-
tion with the hose clamp (see Fig. 54).
If you have removed the suction hose from the suction connector on the mower
since last using the CLS-G/H, then slide the suction hose over the suction connector
again and secure the connection with the hose clamp.
Fig. 54: Suction hose on the turbine cover
Hose clamp
Upper link bolt
Linch pin
Clamp lock