Attaching and detaching the CLS 650/850
Page 28
Fig. 42: Pivot wheel
2.
First mount the tow arms of the quick-hitch to the CLS. To do this the tow arms must
be inserted left and right on the cross strut and the cross strut must be bolted onto
the CLS.
Fig. 43: Connecting axle, quick-hitch
3.
Move the tractor in reverse, toward the CLS-G/H 650/850.
4.
Push the implement as close to the tractor as possible.
5.
Couple the PTO shaft to the tractor. To do this proceed as described in section
5.2.2.
6.
Place the two arms of the quick-hitch into the spaces provided for this purpose be-
tween the mounting brackets (1) and the tractor frame.
Fig. 44: Tow arm mounting on the tractor
Tube linch pin
Cross strut
Tow arm
Tow arm
Bolt
Spring cotter pin
