Rev.
Descrizione
Redatto/Gestito
Approvato
Cod.Ident.
Pagine
Data Em.
0.6
Manuale Istruzioni
GN
UTEC
B041.M01.EN
28
/47
07/2014
4. Stop the manual activation by pressing the button
or
key-pad.
It is also possible to check the correct calibration of the analog channel using the button
.
C
o
m
m
a
n
d
s
Readout zeroing
Start the manual
activation
Screen closure
When the manual activation is started (by pressing the
button
) the machine:
•
enters immediately the manual mode (in case of calibration of the gyration angle channel or of the specimen
height channel);
•
moves the piston downwards until it touches the standard cell previously positioned into the machine (in case
of calibration of the applied load channel).
ATTENTION
The manual activation function must be activated only by professional and experienced
staff, as this operation may damage/break the machine.
ATTENTION
The manual activation for the control of the gyration angle channel and applied load
channel calibration, can be activated only if the specimen height channel has been
previously set and calibrated.
The screen of the calibration check will be as follows:
Commands
Readout zeroing
To move the piston
upwards
To stop the manual
activation
Tomove the piston
downwards
Calibration of the gyration angle channel:
Calibration of the specimen height channel:
1. Position the mould.
2. Press these buttons to
move the piston upwards
and downwards until it
touches the mould
and
or
(
and
key-
pad)
3. Perform a manual rotation until the minimum
positioned is reached.
4. Position the distance pieces of different dimensions
and check the corresponding readouts.
5.
Repeat the operations described at points 3 and 4
until all the calibration steps are set.
1. Press these buttons to
move
the
piston
downwards/upwards until
it rests on the distance
pieces
of
different
dimensions; then check
the
corresponding
readouts.
and
or
(
and
when
using the key-pad)
2. Stop the manual activation by pressing the button
or
when using the key-pad.
Calibration of the applied load channel:
