Rev.
Descrizione
Redatto/Gestito
Approvato
Cod.Ident.
Pagine
Data Em.
0.6
Manuale Istruzioni
GN
UTEC
B041.M01.EN
25
/47
07/2014
SYSTEM CONFIGURATION MENU
It allows the selection of the “specific” configuration functions of the appliance. The main menu items are as
follows:
input
analog
channels
configuration
(OPERATION
SECURED BY PASSWORD –
default 3333).
output
analog
channel
configuration
(OPERATION
SECURED BY PASSWORD –
default 3333).
machine configuration
(OPERATION SECURED BY
PASSWORD – default 2222).
How to select an item of the control panel menù
through the touch-screen
1.
Scroll the menuuntil
the desired item is
visualized.
or
2. Touch the desired item and wait for the
activation of the selected function.
How to go back to the main menu through the
touch-screen
Touchand wait for the main menu visualization.
How to select an item of the control panel menù
using the keyboard
1.
Scroll the menuuntil the
desired item is visualized
oR
2.
Push the confirmation keyand wait for the
activation of the selected function.
How to go back to the main menu using the
keyboard.
Push the button
and wait for the main menu
visualization.
INPUT ANALOG CHANNELS CONFIGURATION
The gyratory compactor check the gyration angle, the load
application and the specimen height, by reading analog
channels properly set and calibrated. (
optionally the
weight of the specimen)
ATTENTION
The gyration angle is
read by channel 2, the
applied load by channel
4, and the specimen height by channel 7
(weight from
channel 1.)
Select the analog channel from the first screen shown in the
picture to set and calibrate it.
Commands:
Screen closure
Select one of the analog channels to enter the
configuration screen, that allows the operator to set the
function as well as the reading mode of test data.
Commands
Calibration
Annul
changes
Advanced configuration
(available only for
specimen height channel)
Confirm
changes
Filter depth
