ROLLER SOLUTIONS
— Use and Maintenance Instructions (cont.)
Page 2
Dimensions in Inches(millimeters) © Mate Precision Technologies Inc. mate.com
LIT01152 Rev B
Mate Precision
Technologies
• 1295 Lund Boulevard • Anoka, Minnesota 55303 USA • Phone 763.421.0230 • 800.328.4492 • Fax 763.421.0285 • 800.541.0285
The Mate Logo is a registered trademark of Mate Precision
Technologies
Inc.
Mate Roller Solutions is a registered trademark
of Mate Precision
Technologies
Inc.
I. SAFETY WARNING
MATE PRECISION TECHNOLOGIES ROlLER SOLUTIONS
Mate Precision Technologies Roller Solutions tooling represents a unique and innovative approach to sheet metal
fabrication. The operation of this tooling is unlike any other style of tooling manufactured for use in a turret punch
press. Therefore, it is imperative that all persons involved in the operation and programming of the turret punch press
read and become thoroughly familiar with the entire contents of this manual prior to the installation, use or
maintenance of this tooling. Failure to do so may result in operator injury, damage to the turret punch press and/or
turret punch press tooling.
For further information about Mate’s Roller Solutions tooling, contact your local Mate Sales Engineer or our Customer
Service Department.