4. At the left side of the C
ARRIAGE
, use Sellotape to stick the end of the E
NCODER
S
CALE
onto the beam, as shown below.
10100139 - C
© Matan Digital Printers Ltd.
Page 5 of 13
One of the ends of the encoder magnetic scale stuck to the beam
5. Make sure that the S
CALE
roll is to your left and that its end is at the bottom
of the roll and facing to your right.
6. Move the C
ARRIAGE
to the left, over the S
CALE
, until you see the right end of
the S
CALE
exposed at the right side of the C
ARRIAGE
, as shown below.
The encoder magnetic scale appears to the right of the Carriage
7. Remove the Sellotape from the end of the S
CALE
.
Encoder Scale
Sellotape
Carriage
Encoder Scale
Sellotape
