- 7 -
While manipulating with the shift, never use protection gloves, there is a danger of catching in the gearing
MATERIALS AND DISPOSAL
These machines are built with
materials that do not contain substances that are toxic
or poisonous to the operator.
During the disposal phase the
machine should be disassembled and its components
should be separated according to
the type of material they are made from.
DISPOSAL OF USED MACHINERY
Collecting places / banks de-
signed for back withdrawer should be used for dispos-
al of machinery put out of oper-
ation.
Don’t throw away machinery
into common waste and apply the procedure men-
tioned above.
ATTENTION!
When using the welding machine with standby power supply, mobile power supply (generator), it is
necessary to use a quality standby supply with sufficient performance and with quality regulation.
The performance of the machine must comply with the minimum value of supply on the label of the machine for
maximum load. If you do not adhere to this rule, there is a danger that the machine will not weld in a quality way or
will stop welding for the given maximum welding current or that the machine will be damaged because of great
decreases and increases of the supply voltage.
Description and installation
DESCRIPTION OF MAIN PARTS
Picture 1
1 - Euro Connector (+)
2 - Earth Cable Socket (-)
3 - Remote control connector
4 - Control panel
5 - Shielding gas inlet
6 - Main switch
7 - Primary cable inlet
8 – Spool Holder
9 - Wire feeder
