Page 5 of 34
MW1901
©| AES Industrial Supplies Ltd | 2019 all rights reserved
reproduction of this manual, even partial, is forbidden.
INTRODUCTION
By
Description
2
Storage of the instruction manual
The instruc�on manual must be kept safely and must be handed over to new owners in case of sale throughout the
life cycle of the machine.
To help preserve the manual in good condi�on it must be handled with care and with clean hands, and it must not be
placed on dirty surfaces.
It is forbidden to remove, tear out or arbitrarily modify any parts of the manual.
The manual must be stored in an environment away from humidity and heat, in a posi�on near the machines to which
it refers.
Upon the User’s request the Manufacturer shall supply other copies of the machine’s instruc�on manual.
INTRODUCTION
By
Description
3
Updating of the Instruction Manual
The manufacturer reserves the right to modify the project and improve the machine without informing customers and
without upda�ng the manual already delivered to the User.
If modifica�ons are made to a machine installed at the customer’s premises, in agreement with the manufacturer, and
which entail the amendment of one or more chapters of the manual, the manufacturer shall send the amended chapters
to the holders of the Instruction Manual and its new overall revision.
According to the instruc�ons that will accompany the updated documenta�on, the User shall replace the old chapters
in the copies held with the new ones, as well as the first page and table of contents with the new revision level.
