Page 20 of 34
MW1901
©| AES Industrial Supplies Ltd | 2019 all rights reserved
reproduction of this manual, even partial, is forbidden.
(Figure 3)
Then fix the filter module (Figure 4), the flange of the fan and the flange of the inlet hopper must join together perfectly.
You must use the screws and wall plugs suitable for the type of construc�on of the wall; AIt does not provide for the
screws and the fixing systems. The choice is totally le� to the installer who can evaluate the best available technologies.
(Figure 4)
At the end of the assembly and fastening the filter module complete with ar�culated arm and electric turn out to be as
shown in figure 5 below.
