Masterweld MW1901, Инструкция по эксплуатации

Страница: 31 / 34

MW1901
Page 31 of 34
©| AES Industrial Supplies Ltd | 2019 all rights reserved
reproduction of this manual, even partial, is forbidden.
MAINTENANCE OF THE MACHINE
By Description
5
Table Of Maintenance Scheduled
Periodic
TYPE OF VERIFICATION
OR MAINTENANCE
Method Cadence DATE VERIFICATION AND MAINTAINER NAME
1 2 3 4 5
1 GENERAL CONTROL OF THE
STATE OF THE AIR PURIFIER Visual Daily
2 Cleaning Manual See Note A
3 CHECKING THE CONDITION
OF THE SEALS Visual 150 HOURS
4 CONTROL OF THE
TIGHTENING OF THE BOLTS Manual 150 HOURS
5 FILTER CLOGGING
CONTROL VISUAL OR
MANUAL
600 HOURS See
Note B
6
CHECKING THE VACUUM
CLEANER Manual See Note C
7 BEARINGS CHANGE Manual 40000 HOURS
See Note D
NOTE THE
The Intervals of Cleaning Are Closely in Correlation To Type Of Fluid Carried To To His Concentra�on, Over That The environment
Of Work To which it is Exposed. Is So Must That The user Final Determine A cadence of Cleaning Such That The Machine Is All
the �me Perfectly Clean And That On Party Fixed Not Yes Are a Create Accumula�ons Of Material Stra�fied For Over 5 mm of
Thickness.
NOTE B
The Replacement Of Filters Is Reported From one Affixed Device This Of Series On the equipments Anyway Should Check What
Was Of Clogging In order to Can Have All the �me The Maximum Suc�on And the Maximum Efficiency Of Machine And So Would
Preferable Give a cadence of Cleaning What Indicated In Paragraph Of Detail Filters Over That Replace At least A Time Per year
All The Set of Filters. Also If you don't Used O�en i Filters Yes Deteriorate Anyway.
NOTE C
Is Must Monitor The vacuum cleaner With a cadence Determined By the user For Verify The Correct Opera�on, That There Are
Damage The Breaks To Impeller And That The Engine Electric Is in Good Condi�ons.
NOTE D
This Is The Life Time for The Which one Are States Sized i Bearings, This Not Removes That For causes External, What Can Be
Vibra�on Higher To Standard For Some Periods The Replacement Should Future Also i Periods More Short. Ending The Their
Cycle of Life, Also Is Apparently Not Have Problems Yes Recommend Of Make Anyway The Replacement Of Bearings.