Page 19 of 34
MW1901
©| AES Industrial Supplies Ltd | 2019 all rights reserved
reproduction of this manual, even partial, is forbidden.
MOVEDTION
By
Description
1
Mounting and fixing the equipment
Fix on the wall shelf black for the support of the fan and of the arm (figure 1).
You must use the screws and wall plugs suitable for the type of construc�on of the wall; AIt does not provide for the
screws and fixing systems. The choice is totally le� to the installer who can evaluate the best available technologies.
(figure 1)
Li� the suc�on arm and using the screws provided, a�ach the turntable rota�on to the shelf just clamped to the wall
(Figure 2).
During �ghtening, check that the movement of the arm is fluid and eventually apply the fat spray in sec�ons in contact.
(Figure 2)
Then place the centrifugal fan in the upper flange of the black bracket installed at wall and secure it using the 4 supplied
screws (Figure 3). Depending on the space available and the possible impediments to the structure or other devices
already installed, you can East the direction of expulsion of air from the fan. In fact it is possible to choose the direc�on
to the right or to the left.
