Page 23 of 34
MW1901
©| AES Industrial Supplies Ltd | 2019 all rights reserved
reproduction of this manual, even partial, is forbidden.
Step 3
Remove the hopper offset and rotate the filter module on the
opposite side, making sure to place the mesh of exhaust air to
the outside.
(Figure 3a)
(Figure 3b)
Step 4
Please re-enter the hopper offset rotated 180 ° with respect
to the previous posi�on.
Make sure to properly secure the screws inside the hopper
for a�achment to the filter module, and external for
fastening with the flange of the fan
.
(Figure 4a)
(Figure 4b)
