Mastervolt MLI Ultra, Руководство пользователя и инструкция по установке, Страница: 15 / 32

MLI Ultra 12/1250, 24/1250
– User and Installation Manual 15
Menu Description
Bat. switch err. Battery switch error
Recovery
failed
This checkbox is marked when the battery recovery has failed
Recovery
active This checkbox is marked when the battery is recovering
History tab
Menu Description
Cycle count The number of cycles so far
Last time 100% Date of the last time that the MLI Ultra was fully charged
Max. Ah used
The maximum used capacity that the MLI Ultra saw
Lowest voltage The lowest battery voltage that the MLI Ultra saw
Highest voltage The highest battery voltage that the MLI Ultra saw
Configuration tab
Menu Description Default
Adjustable
range
Name Name of this device. This name will be
recognized by all devices connected to the
MasterBus network MLI[serial num
ber] 0-12 chars
Language Menu language of this device English English, Dutch
Serial number Serial number of the MLI Ultra (read only)
DIP switches Status of the DIP switches 0 (read only)
CZone This checkbox is marked when the MLI Ultra is
setup to work in a CZone network (read only)
MB power Off: MasterBus powering disabled.
Automatic: MasterBus power will be switched off
when the main current is in between 1.0A and -
1.0A for more than 24 hours and the battery
voltage has dropped below the float voltage.
Always on: the MLI Ultra will power the
MasterBus network. Note that this will slowly
drain the battery.
Note: MasterBus powering is only available if
DIP switch 2 is
ON
.
Off Off / Automatic /
Always on
Auto switch
on Select this option for automatic control of the
battery switch. On On/off
Auto heater Select this option for automatic control of the
heater. On On/off
Processor
Version Firmware main version (read only)
Revision Product version (read only)
Bootloader
ver. Bootloader version (read only)
Note: you need to login as installer to see all following parameters.
Cluster See also section "Configuration of a battery bank
” on page 22
Nr. in series The number of batteries in series 1 1-10
Nr. in parallel The number of batteries in parallel 1 1-24
Confirm
topology Button to confirm the number of batteries in
series and/or parallel