Mastervac 054-0339-8, Инструкция по эксплуатации

Страница: 10 / 25

10
model no. 054-0339-8 | contact us 1-800-689-9928
WARNING!
Do not plug the power cord into a power outlet. Make sure the plug is disconnected before assembling the
wet/dry vacuum. To reduce the risk of electric shock, do not expose to rain.
Verify that the power cord is disconnected from
the outlet.
Lift the power head off the collection tank.
Undo the latches.
Remove the contents from inside the collection
tank; make sure you have all contents as listed
on page 9.
POLARIZED PLUG
To reduce the risk of electrical shock, this appliance has a polarized plug (one blade wider than the other). This plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not change the plug in any way. Double insulation eliminates the need for the three
wire grounded power cord and grounded power supply system.
A cross-head screwdriver is required.
UNPACKING YOUR WET/DRY VACUUM & GENERAL ASSEMBLY
GENERAL ASSEMBLY INSTRUCTIONS
1
3
2
4
2
1
Turn the collection tank upside down and
insert the four caster feet into the slots on
the collection tank. Verify that the casters are
mounted correctly.
5