Mastervac 054-0339-8, Инструкция по эксплуатации

Страница: 14 / 25

14
model no. 054-0339-8 | contact us 1-800-689-9928
WET VACUUM OPERATION
WARNING:
Do not plug the power cord into a power outlet. Make sure the plug is disconnected before changing the
filters.
WARNING:
Be sure to read, understand, and apply information entitled “Safety Guidelines”. Do not vacuum in areas
with flammable gases, vapours, or explosive dusts in the air. Flammable gases or vapours include, but are
not limited to: lighter fluid, solvent-type cleaners, oil-based paints, gasoline, alcohol, or aerosol sprays.
Explosive dusts include but are not limited to: coal, magnesium, grain, or gun powder. To reduce the risk
of health hazards from vapours or dust, do not vacuum toxic materials.
Verify that the power cord is disconnected from
the outlet. Make sure that the collection tank is
clean and free of dust and dirt.
Push the required attachment onto the free end
of the hose or extension wand.
Remove the cartridge filter, then carefully install
the foam wet filter over the filter cage and place
the power head back on the collection tank.
For foam wet filter installation instructions, see
page 21 .
Verify that the switch is in the ‘O’ OFF position
before plugging the power cord into the power
outlet. Plug the power cord into the outlet.
1
3
2
4
LIQUID VACUUMING
DO NOT USE THE CARTRIDGE FILTER FOR LIQUID VACUUMING.
OPERATING INSTRUCTIONS: WET VACUUMING