25
DEFAULT PROGRAM SETTINGS
Allows to the operator to return the program being edited to
its factory default settings. This only affects the program
being edited. The other sampling programs are unaffected.
Upon selecting this menu option and pressing ENTER, the
display will change to:
The default selection will not reset the program settings. You
must use the up arrow to select "RESET PROGRAM SET-
TINGS" and press ENTER. Once the ENTER key has been
pressed, the display will change to:
HINT: If you have returned a program to its default settings,
there is no need to save it.
SAVE PROGRAM
Allows the operator to save an edited program under one of
the five program numbers.
The program being edited does not have to be saved under
the program number you are editing.
If you are editing program #1, this edited program could be
saved as program #5. You will be overwriting whatever pro-
gram was there. Factory default programs can be restored,
modified programs cannot be restored once over written.
Use the down arrow key to navigate and select SAVE
PROGRAMS and press ENTER. The display will change to:
HINT: The display is only 2 lines, so you will only see 2
choices at one time. Remember the arrow in the first column
indicates whether there are choices above or below the ones
you are viewing.
Once you have selected the program number under which the
edited program will be saved and pressed ENTER. The display
will return you to the program selection screen as shown below.
The LCD display will show you the program number you have
saved the edited program under with a date at the far right of
the screen. This date indicates that the program is an edited
or modified program and the date it was saved. Programs
using factory supplied defaults will not display a date to the
right of the program number. In this way you can differentiate
between a factory program and an edited one.
HINT: If you attempt to exit the VIEW/EDIT PROGRAMS
menu without saving the program the following display screen
will appear.
This is to confirm your choices and prevent accidental loss of
desired changes to a program.
HINT: Edited programs can only be run once they are saved.
If you do not save the edited program, it cannot be run and
your edits will be lost.
HINT: To exit the menu and return to a system ready prompt
use the cancel key.
c
RESET PROG SETTINGS
g
DON’T RESET SETTINGS
g
DEFAULT PROG SETTINGS
c
SAVE PROGRAM
c
SAVE PROGRAM #4
c
SAVE PROGRAM #5
c
PROGRAM #X 09/23/02
c
PROGRAM #X
PROGRAM NOT SAVED
ENTER=SAVE CANCEL=NO SAVE
g
SAVE PROGRAM #1
c
SAVE PROGRAM #2
c
SAVE PROGRAM #2
c
SAVE PROGRAM #3
