MasterCraft 055-6739-8, Руководство пользователя

Страница: 9 / 48

9
Ripping or Rip Cut
A cutting operation along the length of the workpiece.
Bevel Cut
A cutting operation made with the blade at any angle other than 90° to the
table surface.
Compound Cut
A crosscut made with both a mitre angle and a bevel angle.
Crosscut
A cutting or shaping operation made across the grain or width of the
workpiece.
Mitre Cut
A cutting operation made with the workpiece at any angle to the blade other
than 90°.
Dado Cut
A non-through cut that produces a square-sided notch or trough in the
workpiece (requires a special blade).
Non-Through Cut
Any cutting operation where the blade does not extend completely through the
thickness of the workpiece.
Through-sawing
Any cutting operation where the blade extends completely through the
thickness of the workpiece.
Freehand
Performing a cut without the workpiece being guided by a fence, mitre gauge,
or other aid.
Kickback
A hazard that can occur when the blade binds or stalls, throwing the
workpiece back toward the operator.
Push Stick
A push stick should be used for narrow ripping operations. These aids help to
keep the operator’s hands well away from the blade.
Worktable
Surface where the workpiece rests while performing a cutting, drilling,
planing, or sanding operation.
Kerf