MasterCraft 055-0216-8, Инструкция по эксплуатации

Страница: 35 / 62

headline bars
35
MAINTENANCE
Remove the spark plug cable from the
spark plug.
Use a spark plug socket tool (not
included), or a 13/16" (21 mm) socket
(not included) to remove the plug.
Remove the snap-on cover holding the air
filter to the assembly.
Remove the foam element.
Wash in liquid detergent and water. Squeeze
thoroughly dry in a clean cloth.
Saturate in clean engine oil.
Squeeze in a clean, absorbent cloth to remove
all excess oil.
Place the filter in the assembly.
Reattach the air filter cover and snap in place.
CLEANING AND ADJUSTING THE SPARK PLUG
CLEANING THE AIR FILTER
1
1
2
4
5
6
7
3
SPARK PLUG GAP
Inspect the electrode on the plug.
It must be clean and not worn to
produce the spark required for
ignition.
Make certain the spark plug gap is
0.028-0.031 in. (0.7-0.8 mm).
Refer to the spark plug types in
Specifications when replacing the
plug.
Firmly re-install the plug.
Attach the spark plug cable to the
spark plug.
3
4
5
6
7
2