MasterCraft 055-0216-8, Инструкция по эксплуатации

Страница: 34 / 62

headline bars
model no. 055-0216-8 | contact us 1 800 689-9928
34
MAINTENANCE
CHANGING THE ENGINE OIL
Change oil when the engine is warm. Refer to the oil specification to select the proper grade for
your operating environment.
Place an appropriate oil drain container
on the ground next to the frame on the
oil drain/fill side of the generator.
OIL DIPSTICK
QUICK DRAIN TUBE
MAX MAX
1
2
3
4
5
6
Remove oil fill cap/dipstick.
Using a pliers, slide the spring clamp
down the oil drain hose and then pull
the hose off the plug bracket.
Place the end of the oil drain tube
into the oil drain container and allow
the oil to completely drain. NOTE:
The tube end must be lower than the
engine base in order for all the oil to
drain.
Add oil according to Add Engine Oil in
Assembly section. DO NOT OVERFILL.
Dispose of used oil at an approved
waste management facility.
NOTE:
Once oil has been added, a visual check should show oil about 1-2 threads from running out of the fill
hole. If using the dipstick to check oil level, DO NOT screw in the dipstick while checking.