MasterCraft 055-0216-8, Инструкция по эксплуатации

Страница: 36 / 62

headline bars
model no. 055-0216-8 | contact us 1 800 689-9928
36
MAINTENANCE
Allow the engine to cool completely
before servicing the spark arrestor.
Remove the three screws holding the
cover plate which retains the spark
arrestor to the muffler.
Remove the spark arrestor screen.
Carefully remove the carbon deposits
from the spark arrestor screen with a
wire brush.
Replace the spark arrestor if it is
damaged.
Position the spark arrestor on the
muffler and attach with the screws
removed in step 2.
CLEANING THE SPARK ARRESTOR
1
2
3
4
5
6
CAUTION!
• Failure to clean the spark arrestor will result in degraded engine performance.
FPO
ADJUSTING THE GOVERNOR
The air-fuel mixture is not adjustable. Tampering with the governor can damage your generator
and your electrical devices and will void your warranty.
CAUTION!
• Tampering with the factory-set governor will void your warranty.
FPO
GENERATOR BATTERY
Your generator is equipped with an automatic battery charging circuit that charges the battery
while the engine is running. The battery will maintain a proper charge if the unit is used on a
regular basis (about once every two weeks). If it is used less frequently, the battery should be
connected to the included 120 V Smart Charger to keep the battery properly charged.
The battery should be fully charged at least once per month. If the battery is not able to start
the engine, it can be started by manually pulling the engine recoil cord. If the battery voltage is
extremely low, the charging circuit may not be able to re-charge the battery. In this case, the
battery must be connected to a standard automotive style battery charger for
re-charging before it can be used.
The owner/operator is responsible for all periodic maintenance.
Complete all scheduled maintenance in a timely manner.
Correct any issue before operating the generator.