19
www.mastercool.com
Once the identifier is connected and ready, the automatic/manual process continues.
NOTE:
The top of the screen will display language, pressure, temperature, units’ of measure for refrigerant, time
and date. To change these settings please refer to the main menu instructions at the beginning of this manual.
Once an automatic or manual procedure is selected, the next screen shown allows for the selection of a
standard or hybrid vehicle.
NOTE: Per SAE J2788, automatic oil injection for hybrid vehicles is prohibited. To inject oil into a hybrid
vehicle, use a manual hermetically sealed oil injector.
(Follow vehicle manufacture recommendations)
To use the COMMANDER4000 in AUTOMATIC MODE please continue below. If MANUAL MODE is preferred please
skip to the manual section of these instructions.
COMMANDER4000 AUTOMATIC PROCEDURE
AUTOMATIC SCREEN SETTINGS
The automatic screen will display hose flushing, recovery, vacuum, leak test, and refrigerant charge:
COMMANDER4000-E / COMMANDER4000-E-X
Содержание COMMANDER4000
Страница 2: ......
