manualshive.com logo in svg

Masterclock GMR1000, Руководство пользователя, Страница: 7 / 73

Поделиться
Скачать
Masterclock GMR1000 Скачать руководство пользователя страница 7

NTP Driven Clocks

NTDS16

MASTERCLOCK, INC.  

5-YEAR LIMITED PARTS & LABOR WARRANTY   

MADE IN THE USA

phone (USA and Canada): 

phone (international): 

email:  

online:

1-800-940-2248  

+1-636-724-3666 

[email protected] 

www.masterclock.com

GMR Series Options

High Stability Oscillators

Freq. = 10 MHz

HSO-1

HSO-2

HSO-3

Oscillator Type

TCXO

OXCO

Rubidium

Freq. Stability - Aging/Day

≤ ± 0.0027ppm 

(or 2.7E-9/day)

≤ ±1E-9/day

±4E-11/day

Freq. Stability - Aging/Year

≤ ± 1.0 ppm 

(or 1E-6 /year)

≤ ±1E-7/year

±1.5E-9/year

Power Consumption

≤0.021W

≤3.5W warm up,

 ≤1.5W steady state

≤14W warm up, 

≤ 8 W steady state

ROHS Compliant

Yes

Yes

Yes

Short Term Stability

(Allan Variance), t =1sec.

-

-

≤5E-11

Time Drift per Year (max)

± 3 sec./year

± 0.25 sec./year

± .001 sec. / year

Phase Noise 

(dBc/Hz) @ 10 

MHz

1 Hz

-

-

≤-65 dBc/Hz

10 Hz

-

≤-110 dBc/Hz

≤-85 dBc/Hz

100 Hz

≤-135 dBc/Hz

≤-130 dBc/Hz

≤-112 dBc/Hz

1k Hz

≤-135 dBc/Hz

≤-145 dBc/Hz

≤-130 dBc/Hz

10k Hz

≤-148 dBc/Hz

≤-155 dBc/Hz

≤-140 dBc/Hz

Available only in GMR5000

Standard

        Masterclock offers three high-stability oscillator options for the GMR Series. When locked to GPS, the OCXO 10 MHz sine wave frequency 

will have the same long-term stability as an atomic clock. When not tied to GPS, a precision frequency 10 MHz reference output is 

        available as a source for laboratory use or for an RF reference, including cellular applications. The HSO option is required for all 
        10 MHz signal outputs.

Содержание GMR1000










































































Отзывы:

Нет отзывов