Masterclock GMR1000, Руководство пользователя, Страница: 13 / 73

Masterclock GMR User Manual v2 – 2016.12
13
TCG: TIME CODE GENERATOR MODULE

Reads SMPTE 24, 25, 30 ‐ fps non ‐ drop frame and SMPTE 29.97 drop frame, IRIG ‐ B (A and E optional),
amplitude modulated and pulse width coded (un ‐ modulated)

Time code signal accuracy: 200 nanosecond

Single ‐ ended unbalanced or differential balanced outputs

DB9 breakout adapter available for differential balanced output (GMR1000 only, not needed on GMR5000)

Programmable delay offset with 1 µS resolution
PPS (PULSE PER SECOND) OUTPUT

5V TTL (Transistor ‐ Transistor Logic) level signal locked to the most accurate time reference

Accuracy compared to top of second of GPS reference: ± 70 nanoseconds

Rising edge of the PPS signal provides the “on time” mark

Standard on GMR5000
PPO: PROGRAMMABLE PULSE OUTPUT

Pulse interval and duration can be selected via software from 100 μ s to 3 days

Pulse output is 5Vpp from a low impedance source

Pulse width selectable from 10 μ seconds to 100 m sec

Accuracy is same as the current reference source (i.e. GPS, time code, NTP, etc.)
10 MHZ SINE WAVE FREQUENCY INPUT AND OUPUT

9V Peak to Peak unloaded at 50 Ohm, 6V Peak to Peak with high impendence load at 50 Ohm
SYNC ‐ IN
•
Sync to PPS, PPM or PPH input
PROGRAMMABLE DRY CONTACT RELAY (24VDC, 250MA)

Single event (daily) programmable relay schedule

Standard on GMR5000