master mechanic 147616, Руководство пользователя

Страница: 7 / 20

7
WARNING:
Know your impact driver. Do
not plug in the charger or install the battery
in the tool until you have read and
understand this Instruction Manual. Learn
the tool’s applications and limitations, as
well as the specific potential hazards related
to this tool.
Following this rule will reduce the
risk of electric shock, fire, or serious injury.
Always wear eye protection. Any
power tool can throw foreign
objects into your eyes and cause
permanent eye damage.
ALWAYS wear safety goggles (not glasses) that
comply with ANSI safety standard Z87.1.
Everyday glasses have only impact resistant
lenses. They ARE NOT safety glasses.
WARNING:
Glasses or goggles not in
compliance with ANSI Z87.1 could cause
serious injury when they break.
Always use hearing protection when operating
the impact driver.
Use only impact sockets and accessories that
are designed for use with an impact driver. Do
not use chrome plated sockets and accessories.
Chrome plated sockets and accessories are
designed for hand use only and MUST NOT be
used with an impact driver. They may shatter
and possibly cause serious injury.
Before each use, check the impact sockets and
accessories for excessive wear or cracks. Worn
or damaged sockets or accessories may shatter
and possibly cause serious injury. Worn
accessories may allow the socket to come off
during operation of the impact driver.
After installing any accessory in the hex drive,
pull outward on the accessory to ensure it is
properly installed and cannot be pulled out of
the hex drive.
Never use the impact driver as a torque wrench.
Always use a torque wrench to adjust the
fastener to the specified torque.
Keep the impact driver handle and body clean
and free of oil and grease. Always use a clean
dry cloth when cleaning. Do not use solvents,
brake fluid, gasoline or other petroleum products
to clean the tool. They will damage the tool.
Do not wear neckties or loose clothing.
When wearing gloves, they must be tight fitting
and slip resistant type. Leather gloves offer the
best protection.
Always use two hands when operating the
impact driver. Use one hand on the handle and
the other on the front of the tool body.
Never place your hand so it is touching the
socket or accessory when the tool is turned ON.
Your hand could be seriously injured.
Always remove the battery from the tool before
installing or removing any socket or accessory.
Be ready for components to shift when removing
any fastener. The speed of the fastener removal
could cause unexpected shifting of the
components.
SPECIFIC SAFETY RULES
SAVE THESE INSTRUCTIONS FOR REFERENCE
!
!