master mechanic 147616, Руководство пользователя

Страница: 12 / 20

12
CHARGER LED FUNCTIONS (Fig. 3)
– cont’d
Too hot or too cold
Both the red LED and the green LED will stay
ON when the work area or battery temperature
is either too high or too low. Remove the battery
from the charger and let it sit at room
temperature 21° C (70° F) for about one hour,
and resume charging.
CHECKING THE BATTERY CHARGE STATUS
(if your battery is equipped with the charge
indicator system)
The level of charge remaining in the battery can
be checked by using the battery LED power
indicator that is contained in the end of the
battery.
NOTE: The battery charge remaining may be
checked while the battery is installed in the tool
with the ON/OFF switch turned OFF. It may also
be checked while the battery is removed from
the tool. DO NOT check the battery charge
remaining while the battery is in the charger.
You will get a false reading and you may also
damage the battery status system.
1.
Press and hold the battery status button (1)
located in the end of the battery (Fig. 4).
2. One or more of the three LED lights in the
LED window (2) will come ON to indicate
the amount of charge that is remaining in
the battery as follows:
3.
Red + Amber + Green (3, 4 & 5)
– 2/3 to
full capacity
Red + Amber (3 & 4)
– 1/3 to 2/3 capacity
Red (3)
– less than 1/3 capacity
4.
Release the battery status button to turn
the LED’s OFF.
INSTALLING A BATTERY IN THE IMPACT
DRIVER
1.
Remove the discharged battery (1) from
the tool by pressing on the battery release
button (2) on the side of the battery
(Fig. 5).
2.
Pull the battery out of the tool handle.
Green
LED
Red
LED
Battery
Inserted
Into
Charger
Charging
Status
ON OFF NO
Charger
connected
to power
supply
OFF Flashing YES
Battery
being
charged
Flashing OFF YES
Battery
nearly fully
charged
ON OFF YES
Battery fully
charged
OFF ON YES
Battery
defective or
bad contact
ON ON YES
Battery too
hot or too
cold to be
charged
Fig. 3
ASSEMBLY AND OPERATING
Fig. 4
Fig. 5