master mechanic 147616, Руководство пользователя

Страница: 11 / 20

11
CHARGING THE BATTERY PACK
WARNING:
Use only the diagnostic fast
charger supplied with the tool to charge the
12 V Li-ion battery supplied with the tool.
Charging any other batteries with this
charger may damage the charger, and
possibly cause serious injury.
1. To charge the battery, place the charger
(1) in a dry location near a 120V AC, 60 Hz
electrical outlet (Fig. 1).
2. Place the battery stem (2) into the
matching cavity (3) in the top of the
charger.
NOTE: Make sure the battery is pressed fully
onto the charger as far as it will go.
3.
Plug the battery charger into the
120V AC, 60 Hz wall receptacle.
NOTE:
Do NOT charge batteries when the work
area or the battery temperature is at or below
0°C (32° F) or above
45°C (113° F).
When the battery charger is plugged into a "live"
receptacle, the battery charger will begin
charging the battery. The red LED (4) and the
green LED (5) on the top of the charger will
indicate the charging status (Fig. 2).
CHARGER LED FUNCTIONS (Fig. 3)
Power ON
The green LED will stay ON when the charger is
plugged into a "live" power source.
Battery partially charged
The red LED will flash during charging.
Battery fully charged
When the battery is approximately 100%
charged, the red LED will turn OFF and the
green LED will flash for a short period of time.
The blinking green LED indicates the charger is
in trickle charge mode while completing the
charging cycle. The battery is fully charged
when the green light is ON.
Under normal circumstances, the battery will be
fully charged in approximately
50 minutes.
NOTE:
You may use the battery as soon as the
green LED begins to flash, as the battery will be
at least 98% charged.
Defective battery
The red LED will stay ON when a defective
battery is detected or a bad contact is detected.
Both the red and green LED’s will stay ON when
a defective battery is detected and the battery is
within the normal charging temperature range.
NOTE: For additional help, call the customer
support toll free number
1-866-349-8665.
ASSEMBLY AND OPERATING
Fig. 1
Fig. 2
!