Master-force 241-0314 Скачать руководство пользователя страница 9

Page 8

SPECIfICATIONS

    WARNING:                     

  The safe use of this 

product requires an understanding of the
information on the tool and in this  
operator’s manual, as well as knowledge 
of the project you are attempting. before 
use of this product, familiarize yourself 
with all operating features and safety 
rules. 

VARIAbLE SPEED

The variable-speed trigger switch delivers 
higher speed with increased trigger 

 

pressure and lower speed with decreased 
trigger pressure.

fORWARD/REVERSE/CENTER LOCk

The direction-of-rotation selector located 

 

above the trigger switch changes the 

 

direction of bit rotation. Setting the trigger 
switch in the OFF (center lock) position 
helps to reduce the possibility of accidental 
starting when not in use.

LED WORk LIGHT

Pressing the trigger switch illuminates the 
LED worklight, located on the front of the 
Impact Driver. This feature provides extra 
light for increased visibility.

ASSEMbLy

    WARNING:                     

 If any part is broken or 

missing, do not attempt to plug in the
power cord, attach the battery or operate 
the Impact Driver until the broken or
missing part is replaced. failure to do so 
could result in possible serious injury.

    WARNING:                     

 Do not attempt to 

modify this Impact Driver or create  
accessories not recommended for use 
with this Impact Driver. Any such  
alteration or modification is misuse and 
could result in a hazardous condition 
leading to possible serious injury.

    WARNING:                     

 To prevent accidental 

starting that could cause serious personal
injury, always remove the battery pack 
from the Impact Driver when assembling
parts.

UNPACkING

This product has been shipped 

 

completely assembled.
1. Carefully remove the tool and any 

 

accessories from the box. Make sure 

 

that all items listed in the packing list  
are included. 

2.  Inspect the tool carefully to make sure 

no breakage or damage occurred during 
shipping.

3. Do not discard the packing material 

 

until you have carefully inspected and  
satisfactorily operated the tool.

CONTENTS

Impact driver, 2 bits, nylon storage bag and 
operator’s manual

Содержание 241-0314

















Отзывы: