Master-force 241-0314, Руководство оператора

Страница: 5 / 16

Page 4
SAfETy INSTRUCTIONS
GENERAL SAfETy RULES
Read all safety
warnings and instructions. failure to
follow the warnings and instructions may
result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for
future reference.
The term power tool in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
WORk AREA SAfETy
1.
keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2.
Do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gases or
dust.
Power tools create sparks which may
ignite the dust or fumes.
3.
keep children and bystanders away
while operating a power tool. Distractions
can cause you to lose control.
ELECTRICAL SAfETy
1. Power tool plugs must match the
outlet. Never modify the plug in any way.
Do not use any adapter plugs with
earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
2.
Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There
is an increased risk of electric shock if your
body is earthed or grounded.
3.
Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
WARNING:
4.
Do not abuse the cord.
Never use the
cord for carrying, pulling or unplugging
the power tool. Keep the cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
5.
When operating a power tool
outdoors, use an extension cord suitable
for outdoor use.
Use of a cord suitable
for outdoor use reduces the risk of electric
shock.
6.
If operating a power tool in a damp
location is unavoidable, use a ground fault
circuit interrupter (GfCI) protected supply.
Use of a GFCI reduces the risk of electric
shock.
PERSONAL SAfETy
1.
Stay alert, watch what you are doing
and use common sense when operating
a power tool.
Do not use the tool while
tired or under the influence of drugs,
alcohol, or medication. A moment of
inattention while operating power tools
may result in serious personal injury.
2.
Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce
personal injuries.
3.
Prevent unintentional starting. Ensure
that the switch is in the off-position
before connecting to power source and/or
battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energizing power tools that have
the switch on invites accidents.
4.
Remove any adjusting key or wrench
before turning the power tool on. A wrench
or a key left attached to a rotating part of
the power tool may result in personal injury.
5.
Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in
unexpected situations.