Master-force 241-0314, Руководство оператора

Страница: 11 / 16

Page 10
OPERATION
DIRECTION-Of-ROTATION
SELECTOR (fORWARD/
CENTER LOCk/REVERSE)
(fIG. 3)
The direction of bit rotation is reversible
and is controlled by a selector located
above the trigger switch. With the Driver
held in normal operating position:
1.
Position the direction-of-rotation
selector to the left of the tool for
forward rotation.
2. Position the direction-of-rotation
selector to the right of the tool for
reverse rotation.
3. Setting the switch in the OFF (center
lock) position helps reduce the
possibility of accidental starting when
not in use.
NOTICE: To prevent gear damage, always
allow the Impact Driver to come to a
complete stop before changing the
direction of rotation.
NOTICE: The Impact Driver will not run
unless the direction of rotation selector is
engaged fully to the left or right.
REVERSE FORWARD
ELECTRIC bRAkE
To stop the Impact Driver, release the
trigger switch and allow the tool to come to
a complete stop. The electric brake quickly
stops rotating. This feature engages
automatically when you release the
trigger switch.
LED WORkLIGHT (fIG. 4)
The LED worklight, located on the front
of the Impact Driver, will illuminate when
the trigger switch is depressed. This
provides additional light on the surface
of the workpiece for operation in
lower-light areas. The LED worklight will
turn off when the trigger switch is
released.
FIG. 3
FIG. 4
LED worklight